Non-woven Industrial Development It is lighter than plastic cloth and provides better air circulation. It is commonly used in products for hygiene and medicine such as sanitary napkins and facial towels. Later, engineering was applied to it. Non-woven fabric is used to shield plants from the effects of cold. While the manufacturing of non-woven fabrics is more complicated than plastic film production, the basic raw materials are virtually the same. It comprises PE (polyvinylchloride), EVA(Ethylene Vinyl Acetate Copolymer), EVA/polyethylene, and PVA/polyvinyl ether. Traditional plastic film is formed into a thin film melting the plastic and then inflating it. In essence, the film is continuous. The material is able to stretch indefinitely. It is smooth and does not have pores. The film is inert and blocks any movement or exchange of molecules. Chemical fibers made of synthetic materials, created using the above listed raw materials were the most popular item in the world of textiles. But basically, these chemical fibers are still woven into cloth by traditional warp and weft weaving. Non-woven materials are created by interconnecting fibers within the same plane and at different angles in all directions. It is not possible to utilize traditional warp and weave methods. It has better material properties than traditional weaves. The manufacturing process can be finished from raw materials to final products in one step. This cuts down on the traditional drawing process, resulting in lower production costs. In recent times, non-woven fabrics were extensively used in the clothing sector. Because of advances in the field of materials research and the development of production technologies non-woven fabrics have become more diverse and is being utilized more extensively. You can find different materials and products everywhere you go in your everyday life. The growing use of non-woven textiles in agriculture is due to their lightness, easy production, low cost, diversity, and wide range of applications. Check out this non woven weed control fabric for advice.
Applications of Non-Woven Fabrics in the Agricultural IndustryNon-woven fabrics were first used in agriculture in Europe in 1978 in order to keep carrots warm for early harvesting and to guard against tomato leaf virus and whiteflies. Non-woven textiles in the United States are used for mulching sweet peppers, cantaloupes, tomatoes, and root vegetables. It is mostly used for heat preservation, early harvesting and pest control. Non-woven fabrics are typically employed as covers for surfaces like grass-proof mats. Short fiber is also used in the production of water-absorbing blankets. These are placed on nursery beds in order that the roots will fully absorb any water. They can be used to make turf or directly used as lawns for gardens. They can be used to plant large trees like garden trees and fruit trees. Non-woven fabrics, which are not made of yarn, are utilized in Taiwan to protect the crops. These are used extensively to control large greenhouses' environmental conditions and save energy. Double-layered cover and canopy curtains minimize the solar radiation and heat loss at nights. High-density spunbonded non-woven TAVIK fabrics were used in the beginning to protect and shade cauliflower bulbs. It was quickly adopted by farmers due to its low thermal conductivity and ability to shade. Later, it was slowly utilized for heat preservation as well as the cultivation of leaf vegetables that was insect-proof. It also served as a shade, heat preservation as well as cultivation for fruit trees and pineapples. Because of Taiwan's unique ecosystem and climate, non-woven sector growth is slow. Taiwan's non-woven fabric producers continue to develop non-woven technologies. They are focusing on air permeability and water absorption and water repellency. It is utilized in the storage and preservation of agricultural goods. Look at this pp agricultural nonwoven fabric for tips.
